Ordinary Discount For Coal Slurry Conveyance Lsaw Line Pipe - customized PTFE lined chemical reactor as per drawing supplied – TOP-METAL Detail:
- Place of Origin:
-
Hebei, China
- Brand Name:
-
TM
- Model Number:
-
as per drawing
- Product name:
-
ptfe lined fittings
- Thickness:
-
1-10mm
- Length:
-
as customized
- Connect:
-
flange
- Customized:
-
support customized according to drawing supplied
- flange type:
-
slip on . weld neck lap joint
- Connect type:
-
2 fixed flanges, 2 loose flanges, 1 fixed flange+1loose flange
Nominal diameter: DN25~DN300,1″~12″
Length: ≤6000mm (size≤DN150) ≤4000mm (size>DN150)
Temperature range: -29°C~180°C
Applicable medium:
Able to transport any concentration of acid, alkali, organic solvents, strong oxidant, toxic and volatile, flammable chemicals.
Specification Instruction:
Kaxite manufactures PTFE lined pipe and fittings by compression molding, isostatic molding, injection molding, transfer molding,
hot rotomolding, ram/paste extrusion, 3D rotational molding etc. Characters as below:
• Working temperature is high at the range of -29°C-200°C; except the molten alkali metals, element fluorine and aromatic
hydrocarbon, lined products can be used in any chemical medium.
• Vacuum resistance. In the range of -29°C-150°C, it is applicable for vacuum condition. In chemical production, the vacuum
condition occurs due to cooling, longitudinal emissions, or medium backflow.
• High-pressure resistance. Within temperature working condition, it can sustain the working pressure of 3.0 MPa.
• Resistance to penetration. Adapt the high-quality PTFE, to make it of high density and enough thickness after advanced lining
processing, make it excellent antiosmosis.
• PTFE advanced lining molding process achieved the status of syn chronous hot expansion or cold shrinkage for steel components
and fluorine plastic.
• Kaxite us adopts the standard size according to HG, GB, DIN, ANSI, and JIS etc., which improves interchangeability, to provide
convenience for installation.
Data sheet
Specific Gravity: 2.14-2.19g/cm3 as per ASTM D 792 test standard.
Tensile Rate: 20.7Mpa minimum as per ASTM D 638 test standard.
Elongation Rate: 250% minimum as per ASTM D 638 test standard.
Manufacture Standard: ASTM D 4895. Operating in vacuum condition within 150°C
Product detail pictures:
Related Product Guide:
10 Essential Altered Tunings Every Guitarist Should Know | Carbon Steel Flange
A Few Facts About Manufacturing Steel Pipes
Ordinary Discount For Coal Slurry Conveyance Lsaw Line Pipe - customized PTFE lined chemical reactor as per drawing supplied – TOP-METAL, The product will supply to all over the world, such as: , , ,
By from -
By from -