- Place of Origin:
-
Hebei, China
- Brand Name:
-
TM
- Model Number:
-
as per drawing
- Product name:
-
ptfe lined fittings
- Thickness:
-
1-10mm
- Length:
-
as customized
- Connect:
-
flange
- Customized:
-
support customized according to drawing supplied
- flange type:
-
slip on . weld neck lap joint
- Connect type:
-
2 fixed flanges, 2 loose flanges, 1 fixed flange+1loose flange
Nominal diameter: DN25~DN300,1″~12″
Length: ≤6000mm (size≤DN150) ≤4000mm (size>DN150)
Temperature range: -29°C~180°C
Applicable medium:
Able to transport any concentration of acid, alkali, organic solvents, strong oxidant, toxic and volatile, flammable chemicals.
Specification Instruction:
Kaxite manufactures PTFE lined pipe and fittings by compression molding, isostatic molding, injection molding, transfer molding,
hot rotomolding, ram/paste extrusion, 3D rotational molding etc. Characters as below:
• Working temperature is high at the range of -29°C-200°C; except the molten alkali metals, element fluorine and aromatic
hydrocarbon, lined products can be used in any chemical medium.
• Vacuum resistance. In the range of -29°C-150°C, it is applicable for vacuum condition. In chemical production, the vacuum
condition occurs due to cooling, longitudinal emissions, or medium backflow.
• High-pressure resistance. Within temperature working condition, it can sustain the working pressure of 3.0 MPa.
• Resistance to penetration. Adapt the high-quality PTFE, to make it of high density and enough thickness after advanced lining
processing, make it excellent antiosmosis.
• PTFE advanced lining molding process achieved the status of syn chronous hot expansion or cold shrinkage for steel components
and fluorine plastic.
• Kaxite us adopts the standard size according to HG, GB, DIN, ANSI, and JIS etc., which improves interchangeability, to provide
convenience for installation.
Data sheet
Specific Gravity: 2.14-2.19g/cm3 as per ASTM D 792 test standard.
Tensile Rate: 20.7Mpa minimum as per ASTM D 638 test standard.
Elongation Rate: 250% minimum as per ASTM D 638 test standard.
Manufacture Standard: ASTM D 4895. Operating in vacuum condition within 150°C
![](https://www.topmetalsupply.com/uploads/H1f697f00c3554916ae0113ae0764f688e.png)
![](https://www.topmetalsupply.com/uploads/H53d328a829c5427fb68fb058abe5967aB.png)
![](https://www.topmetalsupply.com/uploads/Hef3e76fe125949dca39ac98088fc3e2dF.png)
![](https://www.topmetalsupply.com/uploads/H9d5272d524434ed4a0fdb829a14bb69fi.png)
![](https://www.topmetalsupply.com/uploads/Hebe2fdf0664843c5a794ebdd2bb1e605y.jpg)
![](https://www.topmetalsupply.com/uploads/H5e69ab794cab47709925e743897c9b36a.jpg)
![](https://www.topmetalsupply.com/uploads/Hbb381491d2174921a27e478a953bae9as.jpg)
![](https://www.topmetalsupply.com/uploads/H5c5a7401f6d24554b9ce268c6271b7dau.jpg)
![](https://www.topmetalsupply.com/uploads/H25bdc809c6134ece82423f97ff41ad7a3.jpg)
![](https://www.topmetalsupply.com/uploads/Hd8719af72bb64f1e9dfc7895e1f45dfbO.jpg)
![](https://www.topmetalsupply.com/uploads/H7d6d5f0423e24098b34d53995822d80cH.jpg)